Seeed reBot B601-RS
A six-axis desktop arm with a gripper. In Daslab the arm is one cell, and each joint is a part you can pull out.
Runs on our bench
Seeed reBot B601-RSSample data
Loading the model…
PartsDrag one out, or tap it
What Daslab reads
- Angle and speed of all seven motors
- Bus voltage
- Whether the motors are armed, and any fault
- A camera on the same machine
What Daslab can do
- Move a joint, capped in speed and current and held to its range
- Home every joint
- Run a saved motion
- Test its own repeatability
- Cut power to the motors at once
How it connects
A Raspberry Pi running Daslab, a USB-CAN adapter at 1 Mbps, and seven Robstride motors on a 48 V supply.
What we measured
In a five-cycle test on the base joint, the arm tracked to within 0.1° and came home to within 0.1°.
Have this machine, or another one? Tell us the make and model.
Talk to us on LINE3D model from Seeed Studio's reBot-DevArm, licensed CERN-OHL-W-2.0, reduced for the web. Daslab isn't affiliated with Seeed Studio.